Publication List (IPE)

  1. Faisal Mahmud; Lean Tools and Techniques for Improving Production Performance and Waste Reduction in A Plastic Company: A Case Study; 5th International Conference on Industrial & Mechanical Engineering and Operations Management, Dhaka, Bangladesh; December 26, 2022; Department : IPE ; Type : Conference; Area : Industrial Engineering

  2. Mohammad Rashidul Hassan; Simulating energy consumption based on material addition rates for material extrusion of CFR-PEEK: a trade-off between energy costs and cycle time; The International Journal of Advanced Manufacturing Technology; June 06, 2022; Impact Factor (IF): 3.226 ; Department : IPE ; Type : Journal; Area : Additive Manufacturing

  3. Md. Imran Hossain; Development and analysis of nanoparticle infused plastic products manufactured by machine learning guided 3D printer; Polymer Testing; November 28, 2021; Impact Factor (IF): 4.26 ; Department : IPE ; Type : Journal; Area : 3D printing Link: Click Here

  4. Chowdhury Sakib-Uz-Zaman; Development and analysis of nanoparticle infused plastic products manufactured by machine learning guided 3D printer; Polymer Testing; November 28, 2021; Impact Factor (IF): 4.2 ; Department : IPE ; Type : Journal; Area : Additive Manufacturing Link: Click Here

  5. Hasina Tabassum Chowdhury; Fruit traits diversity in Burmese grape through multivariate analysis; Agronomy Journal; October 01, 2021; Impact Factor (IF): 2.24 ; Department : IPE ; Type : Journal; Area : Data Analysis

  6. Mushaer Ahmed; An overview of Asian Cement Industry: Environmental Impacts, Research Methodologies and Mitigation Measures; Sustainable Production and Consumption; August 27, 2021; Impact Factor (IF): 5.032 ; Department : IPE ; Type : Journal; Area : Sustainable Production Link: Click Here

  7. Md. Imran Hossain; Surface coatings analysis and their effects on reduction of tribological properties of coated aluminum under motion with ML approach; Materials Research Express; August 18, 2021; Impact Factor (IF): 1.61 ; Department : IPE ; Type : Journal; Area : Material Science Link: Click Here

  8. Mohammad Rashidul Hassan; The effects of infill patterns and infill percentages on energy consumption in fused filament fabrication using CFR-PEEK; Rapid Prototyping Journal; August 16, 2021; Impact Factor (IF): 3.1 ; Department : IPE ; Type : Journal; Area : Additive Manufacturing

  9. Mushaer Ahmed; High-speed end milling of Ti-6l-4V with RSM-GA based optimization and tool wear investigation; Journal of Production Systems and Manufacturing Science; August 07, 2021; Department : IPE ; Type : Journal; Area : Manufacturing Process Optimization Link: Click Here

  10. Shohanuzzaman Shohan; Non-destructive quality monitoring of 3D printed tissue scaffolds via dielectric impedance spectroscopy and supervised machine learning; 2021 Proc 49th N American Mfg. Res Conf.; July 22, 2021; Department : IPE ; Type : Conference; Area : Non-destructive quality monitoring Link: Click Here

  11. Hasina Tabassum Chowdhury; Assessing the genetic diversity of twenty one Colombo limon L. genotypes through multivariate and covariance matrix analysis; Acta Fytotechnica et Zootechnica; June 30, 2021; Impact Factor (IF): 0.29 ; Department : IPE ; Type : Journal; Area : Data Analysis Link: Click Here

  12. Mahmud Khan; Effects of welding technique, filler metal and post-weld heat treatment on stainless steel and mild steel dissimilar welding joint; Journal of Manufacturing Processes; April 01, 2021; Impact Factor (IF): 5.010 ; Department : IPE ; Type : Journal; Area : Welding Link: Click Here

  13. Mohammad Rashidul Hassan; Investigating Performance of a Machine Learning Algorithm for Forecasting Time Series Electrical Demands based on a Simulation Approach; Proceedings of the 2021 IISE Annual Conference, Institute of Industrial and Systems Engineers (IISE); March 08, 2021; Department : IPE ; Type : Conference; Area : Data Analytics and Information Systems

  14. Md. Imran Hossain; Micromechanical Analysis of Graphene Fiber Reinforced Epoxy Lamina; Recent Activities in Production; February 24, 2021; Impact Factor (IF): 0.12 ; Department : IPE ; Type : Journal; Area : Material Link: Click Here

  15. Prithbey Raj Dey; Six sigma DMAIC approach with uncertainty quantification and propagation in garments industry; Journal of Production Systems and Manufacturing Science; December 24, 2020; Department : IPE ; Type : Journal; Area : Probability, Uncertainty, Six sigma, DMAIC, Garments industry Link: Click Here

  16. Md. Imran Hossain; Development and Characterization of Kevlar-Reinforced Ceramic Composite Materials; Journal of Testing and Evaluation; December 11, 2020; Impact Factor (IF): 1.264 ; Department : IPE ; Type : Journal; Area : Material Science Link: Click Here

  17. Faisal Mahmud; A Case Study on Teesta Water Conflict: A Game Theory Approach; International Conference on Industrial Engineering and Operations Management Harare, Zimbabwe; December 07, 2020; Department : IPE ; Type : Conference; Area : Operations Research Link: Click Here

  18. Nilufa Yeasmin; The efficient routing approach of a vehicle under the vehicle routing problem with simultaneous delivery and pickup for reducing the fuel consumption and pollutants emission; Int. J. of Industrial and Systems Engineering; November 11, 2020; Department : IPE ; Type : Journal; Area : Supply chain management

  19. Nilufa Yeasmin; Optimization model for simultaneous delivery and pickup vehicle routing problem with time windows.; Int. J. Services and Operations; October 29, 2020; Department : IPE ; Type : Journal; Area : Supply chain management

  20. Nilufa Yeasmin; Stature Estimation Using Ulnar Length and Shoulder Elbow Length in a Bangladeshi Population; SN Comprehensive Clinical Medicine; October 24, 2020; Department : IPE ; Type : Journal; Area : Ergonomics

  21. Md. Imran Hossain; Stature Estimation Using Ulnar Length and Shoulder Elbow Length in a Bangladeshi Population; SN Comprehensive Clinical Medicine; October 24, 2020; Impact Factor (IF): 1.14 ; Department : IPE ; Type : Journal; Area : Forensic Science Link: Click Here

  22. Nilufa Yeasmin; Multiphysical analysis of nanoparticles and their effects on plants; Biotechnology and Applied Biochemistry; October 05, 2020; Impact Factor (IF): 1.638 ; Department : IPE ; Type : Journal; Area : Nanoparticles

  23. Md. Imran Hossain; Multiphysical analysis of nanoparticles and their effects on plants; Biotechnology and applied biochemistry; October 05, 2020; Impact Factor (IF): 2.431 ; Department : IPE ; Type : Journal; Area : Material Science Link: Click Here

  24. Mushaer Ahmed; Application of nature inspired algorithms for multi-objective inventory control scenarios; International Journal of Industrial Engineering Computations; September 04, 2020; Impact Factor (IF): 3.15 ; Department : IPE ; Type : Journal; Area : Industrial Engineering (Inventory Modeling) Link: Click Here

  25. Prithbey Raj Dey; Taguchi based Properties Optimization of Shielded Metal Arc Welding Process for Analyzing Defects by using Ultrasonic Testing; DUET Journal; August 19, 2020; Department : IPE ; Type : Journal; Area : Manufacturing, SMAW

  26. Faisal Mahmud; Development and Performance Evaluation of an Optimized Screw type Domestic Oil Expeller; International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA.; August 14, 2020; Department : IPE ; Type : Conference; Area : Industrial Engineering Link: Click Here

  27. Shohanuzzaman Shohan; Building theory of green supply chain management for the chemical industry: An emerging economy context; Management of Environmental Quality; July 30, 2020; Department : IPE ; Type : Journal; Area : Supply Chain Link: Click Here

  28. Faisal Mahmud; Examining Availability of a Packaging Unit: A Pharmaceutical Case; International Conference on Industrial Engineering and Operations Management Dubai, UAE.; March 11, 2020; Department : IPE ; Type : Conference; Area : Industrial Engineering Link: Click Here

  29. Mohammad Rashidul Hassan; Compressed Air Leakage Detection and Quantification through Infrared Thermography; Proceedings of the 2020 IISE Annual Conference, Institute of Industrial and Systems Engineers (IISE); March 06, 2020; Department : IPE ; Type : Conference; Area : Industrial and Systems Engineering Link: Click Here

  30. Shohanuzzaman Shohan; Green supply chain management in the chemical industry: structural framework of drivers. International Journal of Sustainable Development & World Ecology; International Journal of Sustainable Development & World Ecology; October 13, 2019; Department : IPE ; Type : Journal; Area : Supply Chain Link: Click Here

  31. Mushaer Ahmed; A Multi-Item Inventory Control Model using Multi Objective Particle Swarm Optimization (MOPSO); 9th International Conference on Industrial Engineering and Operations Management (IEOM); March 01, 2019; Department : IPE ; Type : Conference; Area : Industrial Engineering (Inventory Modeling) Link: Click Here

  32. Mushaer Ahmed; Raw Material Inventory Control Model for RMG with Shortage Prediction using Nature Inspired Algorithm; International Scientific Conference: Sustainability of Global Garment Industry; March 01, 2019; Department : IPE ; Type : Conference; Area : Industrial Engineering (Inventory Modeling) Link: Click Here

  33. Prithbey Raj Dey; Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition; Measurement Journal; July 18, 2018; Impact Factor (IF): 3.364 ; Department : IPE ; Type : Journal; Area : Manufacturing, optimization, Machining, MQL Link: Click Here

  34. Prithbey Raj Dey; Likelihood-based representation of epistemic uncertainty and its application in robustness-based design optimization; Journal of Structural and Multidisciplinary Optimization; October 18, 2017; Impact Factor (IF): 3.377 ; Department : IPE ; Type : Journal; Area : Probability, Uncertainty, optimization Link: Click Here

  35. Prithbey Raj Dey; Effect of time-controlled MQL pulsing on surface roughness in hard turning by statistical analysis and artificial neural network; The International Journal of Advanced Manufacturing Technology; July 05, 2017; Impact Factor (IF): 2.633 ; Department : IPE ; Type : Journal; Area : Manufacturing, Probability, ANN, Machining, MQL Link: Click Here

  36. Hasina Tabassum Chowdhury; Stress_distribution_in_CNT-Aluminum_matrix_composite_by_changing_distances_between_CNT_bundles; Journal of Naval Architecture and Marine Engineering; December 29, 2016; Impact Factor (IF): 2.1 (2019) ; Department : IPE ; Type : Journal; Area : Nanotechnology

  37. Nilufa Yeasmin; Improving Workplace by using 5’S tool – A typical application of sorting method.; International Journal of Services and Operations Management; October 09, 2015; Department : IPE ; Type : Journal; Area : Quality management

  38. Prithbey Raj Dey; An Efficient Approach for Robustness-based Design Optimization under Interval Uncertainty; International Journal of Advancements in Mechanical and Aeronautical Engineering; July 15, 2015; Department : IPE ; Type : Journal; Area : Probability, Uncertainty, optimization

  39. Nilufa Yeasmin; Workers occupational stress problem in selected industry.; International Journal of Indian Culture and Business Management; April 30, 2015; Department : IPE ; Type : Journal; Area : Ergonomics

  40. Prithbey Raj Dey; Likelihood-based Approach to Representation of Interval Uncertainty; 15th National Statistical Conference, Bangladesh Statistical Association, Bangladesh; December 27, 2014; Department : IPE ; Type : Conference; Area : Probability, Uncertainty

  41. Shohanuzzaman Shohan; AGGREGATE PLANNING USING TRANSPORTATION METHOD: A CASE STUDY IN CABLE INDUSTRY; International Journal of Managing Value and Supply Chains; September 03, 2014; Department : IPE ; Type : Journal; Area : Operations Research Link: Click Here

  42. Nilufa Yeasmin; Study on Workers Occupational Stress and Guidelines at Jute Mills in Bangladesh.; International Conference on Mechanical, Industrial and Energy Engineering; February 02, 2013; Department : IPE ; Type : Conference; Area : Statistics