Publication List (ME)

  1. Mohammad Zoynal Abedin; Fabrication and characterization of plastic tiles from plastic wastes in Bangladesh; AIP Conference Proceedings 2643, 050048 (2023); https://doi.org/10.1063/5.0110368; January 10, 2023; Impact Factor (IF): 2.75 ; Department : ME ; Type : Journal; Area : Engineering Link: Click Here

  2. Mohammad Zoynal Abedin; Optimization of Cutting Temperature and Surface Roughness in Ti-6Al-4V Alloy Turning on CNC Lathe using Response Surface Methodology; International Journal of Engineering Materials and Manufacture (2022); December 31, 2022; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  3. Mohammad Zoynal Abedin; Development process of composite polymer tiles with an antimicrobial agent using plastic wastes as raw materials; 2nd International Conference on Mechanical Engineering and Applied Sciences, 2022 (ICMEAS 2022), Military Institute of Science and Technology (MIST), Dhaka, Bangladesh from 8-12 December 2022; December 08, 2022; Impact Factor (IF): 0.49 ; Department : ME ; Type : Conference; Area : Engineering

  4. Mohammad Zoynal Abedin; Potentiality of biodiesel and bioethanol production from feedstock in Bangladesh: A Review; Heliyon, 8(11) (November 1, 2022) e11213; November 01, 2022; Impact Factor (IF): 3.776 ; Department : ME ; Type : Journal; Area : Engineering

  5. A.N.M. Mominul Islam Mukut; Investigation of engine performance, combustion, and emissions using waste tire Oil-Diesel-Glycine max biodiesel blends in a diesel engine; Case Studies in Thermal Engineering; September 30, 2022; Impact Factor (IF): 6.26 ; Department : ME ; Type : Journal; Area : Bio fuel Link: Click Here

  6. Mohammad Zoynal Abedin; Effects of Fire Hazards Due to Leakage in Gas Circulation Lines in Bangladesh: A Comprehensive Review; International Journal of Engineering Materials and Manufacture 7(3) (2022) 95-103; September 29, 2022; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  7. Mohammad Zoynal Abedin; Status and Effective Factors for Biogas Production in Bangladesh: A Comprehensive Review; Journal of Renewable Energy and Resources, Mantech Publications 7(2) 2022.; August 22, 2022; Impact Factor (IF): 0.49 ; Department : ME ; Type : Journal; Area : Engineering

  8. Mohammad Zoynal Abedin; A Review on Electrical and Electronics Waste Management and Generation in Bangladesh; Journal of Renewable Energy and Resources, Mantech Publications 7(2) 2022.; August 22, 2022; Impact Factor (IF): 0.49 ; Department : ME ; Type : Journal; Area : Engineering

  9. Mohammad Zoynal Abedin; A Review on Sustainable Biofuel Production in Bangladesh: Status, Source, Challenge and Solution; Journal of Renewable Energy and Resources, Mantech Publications 7(2) 2022.; August 22, 2022; Impact Factor (IF): 0.49 ; Department : ME ; Type : Journal; Area : Engineering

  10. Mohammad Zoynal Abedin; Microbial Fuel Cells: An Introductory Review on Recent Developments in Organic Substrate Use and Bacterial Electrode; Journal of Renewable Energy and Resources, Mantech Publications 7(2) 2022.; August 22, 2022; Impact Factor (IF): 0.49 ; Department : ME ; Type : Journal; Area : Engineering

  11. Mohammad Zoynal Abedin; A Review on Automobile Waste: Management, Recycling and Reusing Technology; Journal of Automotive Engineering & Technology, Mantech Publications 7(2) 2022.; August 22, 2022; Impact Factor (IF): 0.49 ; Department : ME ; Type : Journal; Area : Engineering

  12. Mohammad Zoynal Abedin; A Review on Biomass Production: Status, Challenge and Prospect in South Asia; Journal of Modern Mechanical Systems and Machines, Mantech Publications 7(2) 2022.; August 22, 2022; Impact Factor (IF): 0.49 ; Department : ME ; Type : Journal; Area : Engineering

  13. Mohammad Zoynal Abedin; Waste to Energy Technologies for Municipal Solid Waste Management in Bangladesh: A Comprehensive Review; International Journal of Engineering Materials and Manufacture (2022) 7(3) 77-86; July 20, 2022; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  14. Mohammad Zoynal Abedin; Design and fabrication of a wet dust collector for industrial applications; 1st International Conference on Mechanical, Manufacturing and Process Engineering 2022 (ICMMPE 2022) from 25-27 June 2022. [Abstract Accepted for Poster Presentation]; June 25, 2022; Department : ME ; Type : Conference; Area : Engineering

  15. Mohammad Zoynal Abedin; Design and fabrication of an automatic incubator by indigenous means; 1st International Conference on Mechanical, Manufacturing and Process Engineering 2022 (ICMMPE 2022) from 25-27 June 2022. [Abstract Accepted for Poster Presentation]; June 25, 2022; Department : ME ; Type : Conference; Area : Engineering

  16. Mohammad Zoynal Abedin; Production of biofuel from plastic wastes by pyro technique process; 1st International Conference on Mechanical, Manufacturing and Process Engineering 2022 (ICMMPE 2022) from 25-27 June 2022. [Abstract Accepted for Poster Presentation]; June 25, 2022; Department : ME ; Type : Conference; Area : Engineering

  17. Md. Ramjan Ali; Recent advances in lithium-ion battery materials for improved electrochemical performance: A review; Journal of Results in Engineering, 15 (2022) 100472; June 16, 2022; Impact Factor (IF): 4.06 ; Department : ME ; Type : Journal; Area : Lithium Ion Battery Link: Click Here

  18. Md. Ramjan Ali; Enhancement of Thermal Properties of Kevlar 29 Coated by SiC and TiO2 Nanoparticles and their Binding Energy Analysis; Elsevier; Arabian Journal of Chemistry; Online published; May 18, 2022; Impact Factor (IF): 5.165 ; Department : ME ; Type : Journal; Area : Polymeric coatings Link: Click Here

  19. Md. Akibul Islam; Enhancement of Thermal Properties of Kevlar 29 Coated by SiC and TiO2 Nanoparticles and their Binding Energy Analysis; Elsevier; Arabian Journal of Chemistry; Online published; May 18, 2022; Impact Factor (IF): 5.165 ; Department : ME ; Type : Journal; Area : Elsevier; Arabian Journal of Chemistry; Online published

  20. Md. Ramjan Ali; Fabrication and characterization of hybrid coating on Mg–Zn–Ca Mg alloy for enhanced corrosion and degradation resistance as medical implant; Ceramics International; Elsevier; May 05, 2022; Impact Factor (IF): 4.527 ; Department : ME ; Type : Journal; Area : Hybrid Coating Link: Click Here

  21. Mohammad Zoynal Abedin; A design of intelligent controller for direct current; International Journal of Advances in Engineering and Management (IJAEM), 4(4), (2022) 519-536.; April 30, 2022; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  22. Mohammad Zoynal Abedin; Evaluation of causes and effects of fire and other safety incidents in readymade garment industry of Bangladesh; American Journal of Mechanical and Industrial Engineering (AJMIE), 7(1) (2022) 13-30.; March 01, 2022; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  23. Biplov Kumar Roy; Plastic deformation of AA6061-T6 at elevated temperatures: Experiments and modeling; International Journal of Mechanical Sciences; February 15, 2022; Impact Factor (IF): 5.329 ; Department : ME ; Type : Journal; Area : Mechanical Engineering

  24. Mohammad Zoynal Abedin; Periodic maintenance of TOYOTA vehicle: Bangladesh perspective; International Journal of Advances in Engineering and Management (IJAEM), 4(3) (2022) 398-413.; February 01, 2022; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  25. A.N.M. Mominul Islam Mukut; Numerical investigation of double sided plasma vortex generator in separation control; Fluid Dynamics Research; January 31, 2022; Department : ME ; Type : Journal; Area : Flow control Link: Click Here

  26. Md. Ramjan Ali; Fabrication and characterization of jute/cotton bio‑composites reinforced with eggshell particles; Springer; Polymer Bulletin; Online Published; January 31, 2022; Impact Factor (IF): 2.87 ; Department : ME ; Type : Journal; Area : Bio-composite Link: Click Here

  27. Mohammad Zoynal Abedin; Performance evaluation of textile effluent treatment plant: Bangladesh perspective; International Journal of Engineering Materials and Manufacture, 7(1) (2022) 25-34.; January 15, 2022; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  28. Mohammad Washim Dewan; Investigation of jute and glass fibre reinforced hybrid composites manufactured through compression molding process; International Journal of Engineering Materials and Manufacture; January 01, 2022; Department : ME ; Type : Journal; Area : Composite Materials Link: Click Here

  29. A.N.M. Mominul Islam Mukut; Evaluation of double-sided plasma vortex generator in comparison with vane vortex generator on separation control; International Journal of Automotive and Mechanical Engineering; December 06, 2021; Department : ME ; Type : Journal; Area : Flow control Link: Click Here

  30. Mohammad Zoynal Abedin; Segregation of plastic waste from solid waste stream: Bangladesh Perspective; International Journal of Engineering Materials and Manufacture, 6(4) (2021) 324-331.; December 01, 2021; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  31. Mohammad Zoynal Abedin; Fabrication and characterization of plastic tiles from plastic waste in Bangladesh; 8th Brunei International Conference on Engineering and Technology, Brunei Darussalam, 08-10 November 2021.; November 08, 2021; Department : ME ; Type : Conference; Area : Engineering

  32. Mohammad Zoynal Abedin; Effect of Nanofluids on the enhancement of boiling heat transfer: A review; International Journal of Engineering Materials and Manufacture, 6(4) (2021) 259-283.; September 30, 2021; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  33. Md. Ramjan Ali; Recent machine learning guided material research - A review; Computational Condensed Matter, 20 September 2021, e00597; September 20, 2021; Department : ME ; Type : Journal; Area : Machine learning approach in material research Link: Click Here

  34. Biplov Kumar Roy; Correlation between experimental and analytic approaches to study the erosion rate of aluminum-metal matrix composites; Journal of Engineering Research; September 15, 2021; Department : ME ; Type : Journal; Area : Industrial Engineering

  35. Mohammad Zoynal Abedin; Review on heat transfer enhancement in forced convection and two phase flows; Journal of Thermal Engineering and Technology, 6(1) (2021) 62-80.; September 15, 2021; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  36. Mohammad Zoynal Abedin; Review of heat transfer enhancement using advanced enhancers; Journal of Thermal Engineering and Technology, 6(1) (2021) 26-61.; September 01, 2021; Impact Factor (IF): 1.27 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  37. Mohammad Zoynal Abedin; Review on heat transfer enhancement by rectangular fin; International Journal of Engineering Materials and Manufacture, 6(2) (2021) 81-94; September 01, 2021; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  38. Md. Ramjan Ali; Improvement of Interfacial Adhesion Performance of the Kevlar Fiber Mat by depositing SiC/TiO2/Al2O3/Graphene Nanoparticles; Arabian Journal of Chemistry - Elsevier; August 27, 2021; Impact Factor (IF): 5.165 ; Department : ME ; Type : Journal; Area : Nano-Materials

  39. Md. Akibul Islam; Improvement of Interfacial Adhesion Performance of the Kevlar Fiber Mat by depositing SiC/TiO2/Al2O3/Graphene Nanoparticles; Arabian Journal of Chemistry - Elsevier; August 24, 2021; Department : ME ; Type : Journal; Area : Material Science Link: Click Here

  40. Md. Ramjan Ali; Improvement of Corrosion Resistance of galvanization/nickel/chrome plating low carbon steels in H2SO4 under dynamic condition; Surface Topography: Metrology and Properties, Volume 9, Number 3; August 11, 2021; Impact Factor (IF): 2.038 ; Department : ME ; Type : Journal; Area : Surface Coating Link: Click Here

  41. Md. Ramjan Ali; Surface Coatings Analysis and Their Effects on Reduction of Tribological Properties of Coated Aluminum under Motion with ML Approach; Materials Research Express, Volume 8, Number 8; August 10, 2021; Impact Factor (IF): 1.929 ; Department : ME ; Type : Journal; Area : Surface Coating Link: Click Here

  42. Biplov Kumar Roy; Influence of axial feed rate on shape and thickness changes during multi-pass tube spinning: experiments and modelling; Forming the Future; June 15, 2021; Department : ME ; Type : Journal; Area : Manufacturing Process

  43. Mohammad Zoynal Abedin; Effect of Nanofluids on the enhancement of boiling heat transfer: A review; International Conference on Engineering Materials and Manufacture, Kualalumpur, Malaysia, 22-23 May 2021.; May 22, 2021; Department : ME ; Type : Conference; Area : Engineering

  44. Mohammad Zoynal Abedin; Segregation of plastic waste from solid waste stream: Bangladesh Perspective; International Conference on Engineering Materials and Manufacture, Kualalumpur, Malaysia, 22-23 May 2021.; May 22, 2021; Department : ME ; Type : Conference; Area : Engineering

  45. Mohammad Zoynal Abedin; A review on heat transfer enhancement by wire coil inserts in various medium; Journal of Material Science & Manufacturing Technology, 6(1) (2021) 25-40.; May 01, 2021; Impact Factor (IF): 1.27 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  46. Mohammad Zoynal Abedin; Effect of surface tension on phase change heat transfer: A review; Journal of Thermal Engineering and Technology, 6(1) (2021) 1-25.; May 01, 2021; Impact Factor (IF): 1.27 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  47. Shaon Talukdar; Study of in-tube condensation heat transfer of zeotropic R32/R1234ze(E) mixture refrigerants; --; April 01, 2021; Impact Factor (IF): 4.947 ; Department : ME ; Type : Journal; Area : Thermofluid Link: Click Here

  48. Biplov Kumar Roy; A study of forming of thin-walled hemispheres by mandrel-free spinning of commercially pure aluminum tubes; Journal of Manufacturing Processes; April 01, 2021; Impact Factor (IF): 5.01 ; Department : ME ; Type : Journal; Area : Manufacturing Process

  49. Mohammad Washim Dewan; Effects of Welding Technique, Filler Metal and Post-Weld Heat Treatment on Stainless Steel and Mild Steel Dissimilar Welding Joint; Journal of Manufacturing Processes; April 01, 2021; Impact Factor (IF): 5.684 ; Department : ME ; Type : Journal; Area : Welding Link: Click Here

  50. Himangshu Bhowmik; Potentiodynamic polarization test as a versatile tool for bipolar plates materials at start-up and shut-down environments: a review; DUET; March 25, 2021; Impact Factor (IF): 1.5 ; Department : ME ; Type : Journal; Area : Energy Engineering

  51. Mohammad Zoynal Abedin; Review on heat transfer enhancement by louvered fin; International Journal of Engineering Materials and Manufacture (IJEMM), 6(1) (2021) 60-80.; January 30, 2021; Impact Factor (IF): 1.27 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  52. Shaon Talukdar; Study of Ozone Effects on CH4/O2/N2 Detonation Waves; --; January 20, 2021; Impact Factor (IF): -- ; Department : ME ; Type : Conference; Area : Combustion Link: Click Here

  53. Mohammad Zoynal Abedin; Effect of minimum quantity lubrication system for improving surface roughness in turning operation; International Journal of Engineering Materials and Manufacture (IJEMM), 6(1) (2021) 50-59.; January 01, 2021; Impact Factor (IF): 1.27 ; Department : ME ; Type : Journal; Area : Engineering

  54. Khurshida Sharmin; Synthesis and Characterization of PVA Based Anion Exchange Membranes for Solid Polymer Electrolytes; DUET Journal; December 20, 2020; Department : ME ; Type : Journal; Area : Electrolyte Membrane

  55. Md. Anowar Hossain; Study of in-tube condensation heat transfer of zeotropic R32/R1234ze(E) mixture refrigerants; International Journal of Heat and Mass Transfer; December 12, 2020; Department : ME ; Type : Journal; Link: Click Here

  56. A.N.M. Mominul Islam Mukut; An Approach to Suppress Flow Separation by Plasma Vortex Generator as a Combined Active and Passive Control Mechanism; IOP Conf. Ser.: Mater. Sci. Eng. 926 012005; December 07, 2020; Department : ME ; Type : Journal; Area : Flow control Link: Click Here

  57. Mohammad Zoynal Abedin; Review on heat transfer enhancement by coiled tube; Journal of Research in Mechanical Engineering and Applied Mechanics, 5(2) (2020) 1-10.; November 01, 2020; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  58. Mohammad Zoynal Abedin; Review on heat transfer enhancement by insert devices; International Journal of Engineering Materials and Manufacture (IJEMM), 5(4) (2020) 130-147.; October 01, 2020; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  59. Biplov Kumar Roy; Experimental and numerical investigation of deformation characteristics during tube spinning; The International Journal of Advanced Manufacturing Technology volume 110, pages1851–1867 (2020); September 01, 2020; Impact Factor (IF): 3.32 ; Department : ME ; Type : Journal; Area : Manufacturing Process

  60. Nayeem Md. Lutful Huq; Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches; Polymer Composites, Volume 41, Issue 12; August 17, 2020; Impact Factor (IF): 3.171 ; Department : ME ; Type : Journal; Area : Applied Mechanics Link: Click Here

  61. Biplov Kumar Roy; Surface characterization and mechanical behavior of aluminum based metal matrix composite reinforced with nano Al2O3, SiC, TiO2 particles; Chemical Data Collections, Volume 28; August 01, 2020; Department : ME ; Type : Journal; Area : Metal fabrication

  62. Md. Arefin Kowser; Fretting & friction induced fatigue failure: damage criterion of polytetrafluoroethylene; Heliyon; June 01, 2020; Department : ME ; Type : Journal; Area : Fretting Fatigue Failure Link: Click Here

  63. Mohammad Zoynal Abedin; Experimental investigation of mechanical and water absorption properties on fiber stacking sequence and orientation of jute/carbon epoxy hybrid composites; Journal of Material Research and Technology (JMRT), 9(5) (2020) 10970-10981.; June 01, 2020; Impact Factor (IF): 5.039 ; Department : ME ; Type : Journal; Area : Engineering

  64. Amit Sutradhar; A sustainable approach to improve the efficiency of earth pipe cooling system; International Journal of Sustainable Engineering; DOI:10.1080/19397038.2020.1740820.; March 21, 2020; Department : ME ; Type : Journal; Area : Thermal Engineering

  65. Biplov Kumar Roy; Tribological study of Al-6063-based metal matrix embedded with SiC–Al2O3–TiO2 particles; SN Applied Sciences, volume 2; February 01, 2020; Department : ME ; Type : Journal; Area : Material characterization

  66. Md. Arefin Kowser; Tribological study of Al-6063-based metal matrix embedded with SiC–Al2O3–TiO2 particles; SN Applied Sciences; January 29, 2020; Department : ME ; Type : Journal; Area : Metal Matrix Composites Link: Click Here

  67. Md. Anowar Hossain; Development and performance analysis of a PCM based cooling fan for hot climate of Bangladesh; Energy and Thermofluids Engineering; January 12, 2020; Department : ME ; Type : Journal; Link: Click Here

  68. Md. Arefin Kowser; Investigation of the Combined Effect of Notch And Fretting on Bending Fatigue; Theoretical and Applied Mechanics; January 01, 2020; Department : ME ; Type : Journal; Area : Fretting Fatigue Analysis Link: Click Here

  69. Mohammad Washim Dewan; On-line phased array ultrasonic testing system for friction stir welding applications; US Patent, US 2019/0388998 A1; December 26, 2019; Department : ME ; Type : Magazine;

  70. Mohammad Zoynal Abedin; Fabrication and experimental investigation on tensile and flexural properties for different stacking sequence of jute and carbon fiber reinforced epoxy composite; 3rd International Conference on Composite Material, Polymer Science and Engineering, Bangkok, Thailand, 24-25 October 2019.; October 24, 2019; Department : ME ; Type : Conference; Area : Engineering

  71. Mohammad Zoynal Abedin; Fabrication and experimental investigation on tensile and flexural properties for different stacking sequence of jute and carbon fiber reinforced epoxy composite; Key Engineering Materials, 858 (2019) 72-77.; October 01, 2019; Impact Factor (IF): 0.49 ; Department : ME ; Type : Journal; Area : Engineering

  72. Himangshu Bhowmik; Transient natural convection heat transfer analyses from a horizontal cylinder; DUET; September 08, 2019; Impact Factor (IF): 4.01 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  73. Md. Arefin Kowser; Characterization and performance analysis of composite bioplastics synthesized using titanium dioxide nanoparticles with corn starch; Heliyon; August 28, 2019; Department : ME ; Type : Journal; Area : Composite Bioplastics Link: Click Here

  74. Md. Arefin Kowser; On the diversity in design for different bending fretting fatigue mechanism; SN Applied Sciences; August 21, 2019; Department : ME ; Type : Journal; Area : Fretting Fatigue Link: Click Here

  75. Md. Anowar Hossain; Heat transfer enhancement of charging and discharging of phase change materials and size optimization of a latent thermal energy storage system for solar cold storage application; Journal of Energy Storage; August 01, 2019; Department : ME ; Type : Journal; Link: Click Here

  76. A.N.M. Mominul Islam Mukut; Numerical investigation of TWEB on drag reduction; AIP Conference Proceedings 2121, 060003 (2019); July 18, 2019; Department : ME ; Type : Journal; Area : Drag reduction

  77. Khurshida Sharmin; Fabrication and characterization of jute/glass fiber reinforced epoxy hybrid composites; Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh; June 06, 2019; Department : ME ; Type : Journal; Area : Composite Material

  78. Mohammad Washim Dewan; Fabrication and characterization of jute/glass fiber reinforced epoxy hybrid composites; Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh; June 01, 2019; Department : ME ; Type : Journal;

  79. Md. Anowar Hossain; Development and Performance Evaluation of a Solar Energy based Portable Micro-Cold Storage; DUET Journal; June 01, 2019; Department : ME ; Type : Journal; Link: Click Here

  80. Mohammad Zoynal Abedin; Heat transfer enhancement by coated surface: a review study; International Journal of Modern Studies in Mechanical Engineering (IJMSME) 5(1) (2019) 10-14.; June 01, 2019; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  81. Mohammad Washim Dewan; Challenges in the detection of weld-defects in friction-stir-welding (FSW); Advances in Materials and Processing Technologies; April 03, 2019; Department : ME ; Type : Journal;

  82. Shaon Talukdar; Heat transfer enhancement of charging and discharging of phase change materials and size optimization of a latent thermal energy storage system for solar cold storage application; --; March 06, 2019; Impact Factor (IF): 3.762 ; Department : ME ; Type : Journal; Area : Energy Link: Click Here

  83. A.N.M. Mominul Islam Mukut; Review on Aerodynamic Drag Reduction of Vehicles; International Journal of Engineering Materials and Manufacture; March 01, 2019; Department : ME ; Type : Journal; Area : Drag reduction

  84. Md. Arefin Kowser; Failure Mechanism of Polytetrafluoroethylene Under Friction Fatigue, M. J Failure Analysis and Prevention; Journal of Failure Analysis and Prevention; January 25, 2019; Department : ME ; Type : Journal; Area : Fatigue Failure Link: Click Here

  85. Mohammad Zoynal Abedin; Review on aerodynamic drag reduction of vehicles; International Journal of Engineering Materials and Manufacture 4(1) (2019) 1-14.; January 01, 2019; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  86. Md. Anowar Hossain; Experimental study of solidification and melting characteristics of thermal energy storage (TES) system; Publisher Logo Conference Proceedings; July 13, 2018; Department : ME ; Type : Journal; Link: Click Here

  87. Biplov Kumar Roy; Experiments and simulation of shape and thickness evolution in multi-pass tube spinning; Journal of Physics: Conference Series; July 01, 2018; Department : ME ; Type : Conference; Area : Numerical Analysis

  88. Md. Arefin Kowser; Investigation of sustainability of lubricated journal bearing under relevant design parameters; Industrial Lubrication and Tribology; May 08, 2018; Department : ME ; Type : Journal; Area : Tribology and Lubrication of Materials Link: Click Here

  89. Rahat Mahmud Khan; Computer modelling of fire safety performance of a ready-made garments building in Bangladesh; Symposium Proceeding on Safety in Garment Industry, Five Years After Rana Plaza; April 30, 2018; Department : ME ; Type : Conference; Area : Fire Dynamics

  90. Nayeem Md. Lutful Huq; Motion Investigation of a Snake Robot with Different Scale Geometry and Coefficient of Friction; Robotics, Volume 7, Issue 2.; April 28, 2018; Impact Factor (IF): 1.79 ; Department : ME ; Type : Journal; Area : Applied Mechanics Link: Click Here

  91. Mohammad Washim Dewan; A fully coupled thermomechanical model of friction stir welding (FSW) and numerical studies on process parameters of lightweight aluminum alloy joints; Acta Metallurgica Sinica (English letters); January 18, 2018; Department : ME ; Type : Journal;

  92. Mohammad Zoynal Abedin; Experimental study of heat transfer enhancement through a tube with wire-coil inserts at low turbulent Reynolds number; International Journal of Engineering Materials and Manufacture 3(3) (2018) 122-133.; January 01, 2018; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  93. Md. Anowar Hossain; Experimental study of solidification and melting characteristics of thermal energy storage (TES) system; The 12th International Conference of Mechanical Engineering, ICME2017; December 20, 2017; Department : ME ; Type : Conference; Link: Click Here

  94. Amit Sutradhar; Design and Construction of an Automatic Electric Wheelchair: An Economic Approach for Bangladesh; 3rd International Conference on Electrical Information and Communication Technology (EICT-2017), PI-61245, Khulna, Bangladesh, DOI: 10.1109/EICT.2017.8275159.; December 07, 2017; Department : ME ; Type : Conference; Area : Control Engineering

  95. Md. Arefin Kowser; Environment Friendly Continuous Flow Gas Generation by Fluidized Bed Rice Husk and Saw Dust Gasifier; DUET Journal; December 01, 2017; Department : ME ; Type : Journal; Area : gasificacion and energy conversion Link: Click Here

  96. Amit Sutradhar; Evaluation and Development of a Self-ruling Internal Control System for Preventing Car Accidents Using Artificial Neural Network; 4th International Conference on Advances in Electrical Engineering (ICAEE-2017), PI-7544, Dhaka, Bangladesh, DOI: 10.1109/ICAEE.2017.8255370.; September 28, 2017; Department : ME ; Type : Conference; Area : Artificial Intelligence

  97. Himangshu Bhowmik; Efficiency improvement of flat plate solar collector using reflector; DUET; September 01, 2017; Impact Factor (IF): 3.6 ; Department : ME ; Type : Journal; Area : Energy Engineering

  98. Md. Anowar Hossain; Experimental Analysis of a Triple Concentric Tube Heat Exchanger; International Journal of Modern Studies in Mechanical Engineering (IJMSME); August 01, 2017; Department : ME ; Type : Journal; Link: Click Here

  99. Md. Anowar Hossain; Prediction of in-tube pressure drop of low GWP refrigerants during condensation and evaporation; Publisher Logo Conference Proceedings; June 20, 2017; Department : ME ; Type : Journal; Link: Click Here

  100. Md. Arefin Kowser; Characteristics and damage mechanisms of bending fretting fatigue of materials; International Journal of Damage Mechanics; February 10, 2017; Impact Factor (IF): 3.125 ; Department : ME ; Type : Journal; Area : Fatigue Fracture Link: Click Here

  101. Mohammad Zoynal Abedin; Higher-order and length-scale statistics of velocity and temperature fluctuations in turbulent boundary layer along a heated vertical flat plate; International Journal of Heat and Fluid Flow 65 (2017) 252-266.; January 01, 2017; Impact Factor (IF): 2.789 ; Department : ME ; Type : Journal; Area : Thermo-Fluid Mechanics

  102. Mohammad Zoynal Abedin; Turbulent combined-convection boundary layer with aiding flows along a heated vertical flat plate at higher freestream velocity; International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, 2016.; December 28, 2016; Department : ME ; Type : Conference; Area : Thermo-Fluid Mechanics

  103. Amit Sutradhar; Feasibility Study of Wind Power Generation by Wind Turbine in Bangladesh; 4th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE-2016); PI. 160276, Khulna, Bangladesh.; December 26, 2016; Department : ME ; Type : Conference; Area : Energy Engineering

  104. Md. Anowar Hossain; Prediction of in-tube pressure drop of low gwp refrigerants during condensation and evaporation; The 7th BSME International Conference on Thermal Engineering (ICTE); December 22, 2016; Department : ME ; Type : Conference; Link: Click Here

  105. Mohammad Zoynal Abedin; An experimental study on accelerated fouling of aluminum oxide and ferric oxide particles in internally enhanced tubes; Journal of Mechanical Science and Technology, Volume 30, Year 2016, Pages 5707–5714.; December 15, 2016; Impact Factor (IF): 1.734 ; Department : ME ; Type : Journal; Area : Thermal Engineering Link: Click Here

  106. Biplov Kumar Roy; Deposition rates on stainless steel substrates of different surface roughnesses under different operating conditions using thermal CVD; International Journal of Surface Science and Engineering, Vol. 10, No. 3; October 01, 2016; Department : ME ; Type : Journal; Area : Mechanical Engineering

  107. Mohammad Washim Dewan; Phased Array Ultrasonic Testing for Post-Weld and OnLine Detection of Friction Stir Welding Defects; Research in Nondestructive Evaluation; September 27, 2016; Department : ME ; Type : Journal;

  108. Mohammad Washim Dewan; Impact of friction stir welding (FSW) process parameters on thermal modeling and heat generation of aluminum alloy joints; Acta Metallurgica Sinica (English Letters); September 01, 2016; Department : ME ; Type : Journal;

  109. Md. Anowar Hossain; Prediction of condensation heat transfer of low GWP refrigerants inside smooth horizontal tube; AIP Conference Proceedings; July 12, 2016; Department : ME ; Type : Journal; Link: Click Here

  110. Mohammad Zoynal Abedin; Turbulent combined-convection boundary layer with aiding flows along a heated vertical flat plate at higher freestream velocity; American Institute of Physics (AIP) Conference Proceedings, 1754, 050023 (2016); July 12, 2016; Impact Factor (IF): 0.402 ; Department : ME ; Type : Journal; Area : Thermo-Fluid Mechanics Link: Click Here

  111. Md. Arefin Kowser; Deposition rates on stainless steel substrates of different surface roughnesses under different operating conditions using thermal CVD; International Journal of Surface Science and Engineering; June 20, 2016; Department : ME ; Type : Journal; Area : Tribology. coating Link: Click Here

  112. Mohammad Washim Dewan; Prediction of tensile strength of friction stir weld joints with adaptive neuro-fuzzy inference system (ANFIS) and neural network; Materials & Design; February 15, 2016; Department : ME ; Type : Journal;

  113. Md. Anowar Hossain; Prediction of Condensation Heat Transfer of Low GWP Refrigerants inside Smooth Horizontal Tube; 11th International Conference on Mechanical Engineering (ICME); December 18, 2015; Department : ME ; Type : Conference; Link: Click Here

  114. Amit Sutradhar; Design and Construction of an Automatic System for Minimizing the Risk of Sinking of Water Vehicle; American Institute of Physics (AIP) Conference Proceedings 1754, 060006-1–060006-11, doi: 10.1063/1.4958447.; December 18, 2015; Department : ME ; Type : Conference; Area : Control Engineering

  115. Biplov Kumar Roy; Erosion characteristics of Teflon under different operating conditions; Journal of Polymer Engineering, Volume -35; November 01, 2015; Department : ME ; Type : Journal; Area : Polymer Engineering

  116. Mohammad Washim Dewan; Influence of weld defects and postweld heat treatment of gas tungsten arc-welded AA-6061-T651 aluminum alloy; Journal of Manufacturing Science and Engineering; September 04, 2015; Department : ME ; Type : Journal;

  117. Md. Anowar Hossain; Two-phase frictional multiplier correlation for the prediction of condensation pressure drop inside smooth horizontal tube; Procedia Engineering; June 01, 2015; Department : ME ; Type : Journal; Link: Click Here

  118. A.N.M. Mominul Islam Mukut; Winglet Type Dielectric Barrier Discharge Plasma Actuators: Performance Characterization and Numerical Comparison; Procedia Engineering; February 15, 2015; Department : ME ; Type : Journal; Area : Flow control

  119. Biplov Kumar Roy; Experimental investigation on friction coefficient of composite materials sliding against SS 201 and SS 301 counterfaces; Procedia Engineering ,Volume 105; January 01, 2015; Department : ME ; Type : Conference; Area : Mechanical Engineering

  120. Md. Anowar Hossain; Two-phase frictional multiplier correlation for the prediction of condensation pressure drop inside smooth horizontal tube; 6th BSME International Conference on Thermal Engineering (ICTE); December 19, 2014; Department : ME ; Type : Conference; Link: Click Here

  121. Md. Anowar Hossain; Two-phase frictional multiplier correlation for the prediction of condensation pressure drop inside smooth horizontal tube; 6th BSME International Conference on Thermal Engineering (ICTE); December 19, 2014; Department : ME ; Type : Conference; Area : Condensation Heat Transfer Link: Click Here

  122. A.N.M. Mominul Islam Mukut; Flow Separation Control Using Plasma Vortex Generator; Procedia Engineering; December 02, 2014; Department : ME ; Type : Journal;

  123. Khurshida Sharmin; Two-step debinding and coextrusion of ceramic-filled PEBA and EVA blends; Ceramics International; November 08, 2014; Impact Factor (IF): 3.8 ; Department : ME ; Type : Journal; Area : Ceramic Materials

  124. Biplov Kumar Roy; Sliding friction of steel combinations; The Open Mechanical Engineering Journal, Volume 8; October 09, 2014; Department : ME ; Type : Journal; Area : Mechanical Engineering

  125. Md. Anowar Hossain; In-tube condensation of low GWP mixture refrigerants R1234ze(E) /R32; 15th International Heat Transfer Conference, IHTC-15; August 10, 2014; Department : ME ; Type : Conference; Area : Refrigeration and Air Conditioning Link: Click Here

  126. Khurshida Sharmin; Optimization of binder removal for thermoplastic co-extrusion of ceramic structures; Ceramics International; April 25, 2014; Impact Factor (IF): 3.8 ; Department : ME ; Type : Journal; Area : Ceramic Processing

  127. Himangshu Bhowmik; Review on convection heat transfer in channel flow with discrete heater arrays for electronic cooling; DUET; February 08, 2014; Department : ME ; Type : Journal; Area : Thermal Engineering

  128. Md. Khaled Khalil; Design and Fabrication of Pump test Rig and Performance Analysis of Submersible (Domestic type) Pump,; Proceedings of the 15th Annual Paper Meet, Institution of Bangladesh (IEB), Dhaka,; February 07, 2014; Department : ME ; Type : Conference; Area : Fluid Mechanics

  129. Mohammad Washim Dewan; Effect of post-weld heat treatment and electrolytic plasma processing on tungsten inert gas welded AISI 4140 alloy steel; Materials & Design; February 01, 2014; Department : ME ; Type : Journal;

  130. Biplov Kumar Roy; Frictional behavior of polymers sliding against smooth and rough mild steel counter faces; Middle-East Journal of Scientific Research, volume 21; February 01, 2014; Department : ME ; Type : Journal; Area : Mechanical Engineering

  131. Md. Khaled Khalil; Enhancement of Heat Transfer by Using Different Types of Fin at Constant Temperature and at Constant Heat Flux; 6th BSME International Conference on Thermal Engineering, IUT, Gazipur, Bangladesh; January 06, 2014; Department : ME ; Type : Conference; Area : Thermal Engineering

  132. Md. Khaled Khalil; Fabrication and Performance Test of Continuous Flow Down Draught Gasifier for Wood Gasification System,; 6th BSME International Conference on Thermal Engineering ,IUT, Gazipur, Bangladesh; January 06, 2014; Department : ME ; Type : Conference; Area : Thermal Engineering

  133. Himangshu Bhowmik; Optimization of a radial flow heat sink under natural convection; DUET; January 01, 2014; Impact Factor (IF): 0.7 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  134. Nayeem Md. Lutful Huq; Investigation on data extraction trends for snake robot; Procedia Computer Science; Volume 42; Issue 2014; January 01, 2014; Impact Factor (IF): 1.1 ; Department : ME ; Type : Journal; Area : Robotics Link: Click Here

  135. Biplov Kumar Roy; Experimental Study on Friction Coefficient and Wear Rate of Gun Metal Sliding Against Different Counterface Materials; Journal of the Balkan Tribological Association, Volume 20; January 01, 2014; Department : ME ; Type : Journal; Area : Tribology

  136. Biplov Kumar Roy; Experimental study of friction coefficient and wear rate of turned and ground mild steel surfaces sliding against smooth and rough SS304 counterfaces; Australian Journal of Mechanical Engineering, Volume 12; January 01, 2014; Department : ME ; Type : Journal; Area : Mechanical Engineering

  137. Nayeem Md. Lutful Huq; Design and Development of Mopping Robot-'HotBot'; IOP Conference Series: Materials Science and Engineering; Volume 53; Issue 1; December 20, 2013; Department : ME ; Type : Journal; Area : Robotics Link: Click Here

  138. Mohammad Zoynal Abedin; Design, fabrication and performance analysis of an evaporative cooler; 15th Annual Paper Meet 2013, Mechanical Engineering Division, The Institute of Engineers, Bangladesh, Dhaka, 06-07 December 2013.; December 06, 2013; Department : ME ; Type : Conference; Area : Thermal Engineering

  139. Himangshu Bhowmik; Analysis of mixed convection heat transfer from flush-mounted discrete heat sources; DUET; November 08, 2013; Department : ME ; Type : Journal; Area : Thermal Engineering

  140. Biplov Kumar Roy; Friction Coefficient of Copper Mating with Smooth and Rough Mild Steel Counterfaces; International Conference on Mechanical, Industrial and Materials Engineering, 2013; November 03, 2013; Department : ME ; Type : Conference; Area : Mechanical Engineering Link: Click Here

  141. Md. Anowar Hossain; Investigation of Condensation Heat Transfer Characteristics for R1234ze(E), R32, R410A and Zeotropic Mixture of R1234ze(E) and R32 inside Smooth Tube; Int. Conf. on Mech., Industrial and Materials Engg. (ICMIME); November 01, 2013; Department : ME ; Type : Conference; Area : Condensation Heat Transfer Link: Click Here

  142. Md. Anowar Hossain; Analysis of condensation heat transfer characteristics of zeotropic refrigerant mixture R1234ze/R32 inside a Horizontal Smooth tube; The Proceedings of the Thermal Engineering Conference 2013; October 18, 2013; Department : ME ; Type : Conference; Area : Condensation Heat Transfer Link: Click Here

  143. Biplov Kumar Roy; Experimental investigation of friction coefficient and wear rate of stainless steel 202 sliding against smooth and rough stainless steel 304 counter-faces; Friction and wear research, volume 1; October 01, 2013; Department : ME ; Type : Journal; Area : Tribology

  144. Nayeem Md. Lutful Huq; Technological Co-Operation and Contribution among OIC Members with Special Reference to Bangladesh and Iraq; Journal of Educational and Social Research; Volume 3; Issue 3; September 03, 2013; Impact Factor (IF): 0.675 ; Department : ME ; Type : Journal; Area : Education and Social Research Link: Click Here

  145. Md. Anowar Hossain; Condensation and evaporation heat transfer of R1234ze(E)/R32 mixture in a horizontal smooth tube; 4th IIR Conference on Thermophysiscal Properties and Transfer Processes of Refrigerants, TP-032; June 17, 2013; Department : ME ; Type : Conference; Area : Refrigeration and Air Conditioning Link: Click Here

  146. A.N.M. Mominul Islam Mukut; Flow Characteristics Induced by Winglet-Type Plasma Actuators; Journal of Fluid Science & Technology, Japan Society of Mechanical Engineers; April 12, 2013; Department : ME ; Type : Journal;

  147. Md. Anowar Hossain; Heat transfer during evaporation of R1234ze(E), R32, R410A and a mixture of R1234ze(E) and R32 inside a horizontal smooth tube; International Journal of Refrigeration; March 01, 2013; Department : ME ; Type : Journal; Link: Click Here

  148. Biplov Kumar Roy; Experimental investigation of friction coefficient and wear rate of composite materials sliding against smooth and rough mild steel counterfaces; Tribology in industry, Volume 35; March 01, 2013; Department : ME ; Type : Journal; Area : Tribology Link: Click Here

  149. Biplov Kumar Roy; Friction Coefficient and Wear Rate of Copper Mating with Smooth and Rough Stainless Steel 304 Counterfaces; Journal of American Science, Volume 9; March 01, 2013; Department : ME ; Type : Journal; Area : Mechanical Engineering

  150. Biplov Kumar Roy; Experimental investigation on friction and wear of stainless steel 304 sliding against different pin materials; World Applied Sciences Journal, Volume 22; March 01, 2013; Department : ME ; Type : Journal; Area : Engineering Link: Click Here

  151. Mohammad Washim Dewan; Post-weld residual stresses and heat treatments of gas tungsten arc welded aluminum alloy AA6061-T651; World Journal of Engineering; February 19, 2013; Department : ME ; Type : Journal;

  152. Biplov Kumar Roy; Biplov Kumar Roy, PhD Experimental investigation of friction coefficient and wear rate of different sliding pairs; World Applied Sciences Journal, volume 28; February 01, 2013; Department : ME ; Type : Journal; Area : Mechanical Engineering

  153. Mohammad Washim Dewan; Effects of carbon nanofibers (CNFs) on thermal and interlaminar shear responses of E-glass/polyester composites; Composites Part B: Engineering; January 01, 2013; Department : ME ; Type : Journal;

  154. Biplov Kumar Roy; Experimental investigation of friction coefficient and wear rate of stainless steel 304 sliding against smooth and rough mild steel counterfaces; Gazi University Journal of Science, Volume 26; January 01, 2013; Department : ME ; Type : Journal; Area : Mechanical Engineering Link: Click Here

  155. Mohammad Zoynal Abedin; Transient thermo-solutal convection of water near 4c with the same gradients in a square cavity; 8th KSME-JSME Thermal and Fluid Engineering Conf., Inchon, Korea, GST06-011, 2012, pp. 1-4.; December 27, 2012; Department : ME ; Type : Conference; Area : Thermo-Fluid Mechanics

  156. A.N.M. Mominul Islam Mukut; Numerical and Experimental Investigation of Winglet Plasma Actuators; The 5th BSME International Conference on Thermal Engineering, 2012; December 12, 2012; Department : ME ; Type : Conference; Area : Flow control

  157. A.N.M. Mominul Islam Mukut; Control of Boundary Layer Separation by Means of Vortex Generator; Japan Society of Mechanical Engineers, General Assembly 2012, Paper ID: S056022; November 11, 2012; Department : ME ; Type : Conference; Area : Flow control

  158. Mohammad Washim Dewan; Thermomechanical properties of alkali treated jute‐polyester/nanoclay biocomposites fabricated by VARTM process; Journal of Applied Polymer Science; October 17, 2012; Department : ME ; Type : Journal;

  159. Khurshida Sharmin; Effect of Fumed Silica Nanoparticles on the Proton Conductivity of PolyimidePhosphoric Anhydride Membranes; Journal of Elastomers & Plastics; October 12, 2012; Impact Factor (IF): 1.2 ; Department : ME ; Type : Journal; Area : Electrolyte Membrane

  160. Md. Anowar Hossain; Heat transfer during evaporation of refrigerants R1234ze(E), R32, R410A and mixture of R1234ze(E) and R32 inside horizontal smooth tube; ECI 8th Int. Conf. on Boiling and Condensation Heat Transfer; June 03, 2012; Impact Factor (IF): 3.461 ; Department : ME ; Type : Conference; Area : Evaporation Heat Transfer Link: Click Here

  161. Md. Anowar Hossain; Experimental study on condensation heat transfer and pressure drop in horizontal smooth tube for R1234ze(E), R32 and R410A; International Journal of Refrigeration; June 01, 2012; Department : ME ; Type : Journal; Link: Click Here

  162. Mohammad Zoynal Abedin; Transient thermosolutal convection of Boussinesq fluid with moving heating and cooling blocks in a square cavity; Taylor and Francis, Numerical Heat Transfer, Part A, Volume 61(8), Year 2012, Pages 594-63.; May 11, 2012; Impact Factor (IF): 2.928 ; Department : ME ; Type : Journal; Area : Thermo-fluid Engineering

  163. Mohammad Zoynal Abedin; Effects of freestream on transition behaviors and turbulence characteristics of thermally-driven boundary layers along a heated vertical flat plate; International Journal of Heat and Fluid Flow, Volume 36, August 2012, Pages 92-100.; April 24, 2012; Impact Factor (IF): 2.789 ; Department : ME ; Type : Journal; Area : Thermo-Fluid Mechanics

  164. Md. Anowar Hossain; Condensation Heat Transfer of Refrigerant Mixture R1234ze(E)/ R32 inside a Horizontal Smooth Tube; KSME-JSME 2012 - 8th KSME-JSME Thermal and Fluids Engineering Conference; March 18, 2012; Department : ME ; Type : Conference; Area : Condensation Heat Transfer Link: Click Here

  165. Nayeem Md. Lutful Huq; A Mathematical Model for the Analysis of Elastic Field in a Stiffened Cantilever of Laminated Composite; Advances in Mechanical Engineering; Volume 4; January 01, 2012; Impact Factor (IF): 1.316 ; Department : ME ; Type : Journal; Area : Applied Mechanics Link: Click Here

  166. Mohammad Zoynal Abedin; Turbulence characteristics and vortical structures in combined-convection boundary layers along a heated vertical flat plate; International Journal of Heat and Mass Transfer, Volume 55 (15-16), Year 2012, Pages 3995-4002.; January 01, 2012; Impact Factor (IF): 5.584 ; Department : ME ; Type : Journal; Area : Turbulence in boundary layer flow

  167. Md. Anowar Hossain; Heat transfer and pressure drop of R1234ze(E) and R32 during condensation and evaporation in horizontal smooth tube; Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers; December 31, 2011; Department : ME ; Type : Journal; Link: Click Here

  168. A.N.M. Mominul Islam Mukut; PIV Measurements of Flow Characteristics Induced by Mini Plate-Wing Plasma Actuators; Proceedings of JSME Fluids Engineering Division Conference (ID-1312; 377-8); November 10, 2011; Department : ME ; Type : Conference; Area : Flow control

  169. Mohammad Washim Dewan; Effect of surface treatment and nanoclay on thermal and mechanical performances of jute fabric/biopol ‘green’composites; Journal of reinforced plastics and composites; November 01, 2011; Department : ME ; Type : Journal;

  170. Mohammad Washim Dewan; Physical, mechanical, and degradability properties of chemically treated jute fiber reinforced biodegradable nanocomposites; Journal of engineering materials and technology; October 13, 2011; Department : ME ; Type : Journal;

  171. Mohammad Washim Dewan; Mechanical performances of surface modified jute fiber reinforced biopol nanophased green composites; Composites Part B: Engineering; September 01, 2011; Department : ME ; Type : Journal;

  172. Mohammad Zoynal Abedin; Exergy analysis of DI diesel engine running on straight soybean oil; 1st International Conference on Mechanical Engineering and Renewable Energy (ICMRE), CUET, Chittagong, 2011, CD-ROM of ICMERE-2011.; June 01, 2011; Department : ME ; Type : Conference; Area : Thermal Engineering

  173. Md. Anowar Hossain; Condensation and Evaporation Heat Transfer of HFO-1234ze(E) in Horizontal Smooth Tube; 10th IEA Heat Pump Conference 2011; May 16, 2011; Department : ME ; Type : Conference; Area : Refrigeration and Air Conditioning Link: Click Here

  174. Mohammad Zoynal Abedin; Rights & Obligations of Contracting Parties in Engineering Contracts in Bangladesh; International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS; February 01, 2011; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Engineering

  175. Mohammad Zoynal Abedin; First Law Analysis of a DI Diesel Engine Running on Straight Vegetable oil; International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS; January 03, 2011; Impact Factor (IF): 1.272 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  176. Md. Arefin Kowser; Asymptotic Analysis for the Singular Stress Behaviour around an Interface Edge of Dissimilar Power-law Hardening Materials Joint; Key Engineering Materials; January 01, 2011; Department : ME ; Type : Journal; Area : Interface FractureMechanics Link: Click Here

  177. Mohammad Zoynal Abedin; Transition behavior and turbulence characteristics in combined-convection boundary layers along a heated vertical flat plate; 13 Asian Congress Fluid Mechanics, Dhaka, Bangladesh, 2010, pp. 759-762.; December 28, 2010; Department : ME ; Type : Conference; Area : Thermo-Fluid Mechanics

  178. Md. Khaled Khalil; Influence of Sliding Speed and Normal Load on The Coefficient of friction and Wear Rate of Aluminum Sliding against Stainless Steel; International Conference on Mechanical, Industrial and Energy Engineering; December 24, 2010; Department : ME ; Type : Conference; Area : Tribology

  179. Md. Khaled Khalil; Variation of friction coefficient with duration of rubbing and sliding velocity for different material; International Conference on Mechanical, Industrial and Energy Engineering; December 23, 2010; Department : ME ; Type : Conference; Area : Tribology

  180. Md. Anowar Hossain; Evaporation heat transfer and pressure drop of CO2/DME mixture in a horizontal tube; International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2010); December 23, 2010; Department : ME ; Type : Conference; Area : Evaporation Heat Transfer Link: Click Here

  181. Mohammad Zoynal Abedin; Effects of freestream on thermally-driven boundary layers along a heated vertical flat plate; 14th International Heat Transfer Conference, Washington DC, USA, 2010, TRK-20 of CD-ROM, pp. 1-8.; December 10, 2010; Department : ME ; Type : Conference; Area : Thermo-Fluid Mechanics

  182. A.N.M. Mominul Islam Mukut; PIV Measurements of Flow Characteristics Induced by Mini Plate-Wing Plasma Actuators; The 63rd Annual Meeting of the American Physical Society's Division of Fluid Dynamics (DFD), Long Beach, California, 2010; November 10, 2010; Department : ME ; Type : Magazine; Area : Flow control

  183. Md. Arefin Kowser; An Iteration Method For Singular Fields around An Interface Edge of Elastic/Power-Law Hardening Materials Joint; Journal of Solid Mechanics and Materials Engineering; October 01, 2010; Department : ME ; Type : Journal; Area : Interface Edge, Stress Singularity, Elastic-plastic Material, Dissimilar Joint, Iteration Method Link: Click Here

  184. Mohammad Zoynal Abedin; Direct numerical simulation of mixed-convection boundary layer in water along a heated vertical flat plate; 47th National Heat Transfer Symposium of Japan, Hokkaido, Vol. 1 No. H 332, 2010, pp. 687-688.; October 01, 2010; Department : ME ; Type : Conference; Area : Thermo-Fluid Mechanics

  185. Mohammad Zoynal Abedin; Structural characteristics of turbulent combined-convection boundary layers along a vertical flat plate; 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Antalya, Turkey, 2010, CD-ROM of HEFAT 2010, pp. 2175-2180.; August 01, 2010; Department : ME ; Type : Conference; Area : Thermo-Fluid Mechanics

  186. Mohammad Zoynal Abedin; Direct numerical simulation for a time-developing combined-convection boundary layer along a vertical flat plate; International Journal of Heat and Mass Transfer, Volume 53 (9-10), Year 2010, Pages 2113–2122.; January 29, 2010; Impact Factor (IF): 5.584 ; Department : ME ; Type : Journal; Area : Thermo-Fluid Mechanics

  187. Khurshida Sharmin; Operational and pressure characteristics of a thermoloop device; Proceedings of the International Conference in Mechanical Engineering, 2009, ICME09-TH-14; December 27, 2009; Department : ME ; Type : Conference; Area : Thermal

  188. Mohammad Zoynal Abedin; Direct numerical simulation for turbulent natural- and mixed-convection boundary layer along a vertical flat plate; 46th National Heat Transfer Symposium of Japan, Kyoto, Vol. 1 No. J-131, 2009, pp. 325 - 326.; December 15, 2009; Department : ME ; Type : Conference; Area : Thermo-Fluid Mechanics

  189. Mohammad Zoynal Abedin; Direct numerical simulation for turbulent combined-convection boundary layers along a vertical heated plate; 58th Annual Paper Meet in Tokai Branch, Gifu, Japan, Vol. 093-1 No. 710, 2009, pp. 417 – 418.; December 01, 2009; Department : ME ; Type : Conference; Area : Thermo-Fluid Mechanics

  190. Md. Anowar Hossain; Two-phase frictional multiplier for the prediction of evaporation pressure drop inside Herringbone microfin tubes; JSRAE Annual Conference; October 21, 2009; Department : ME ; Type : Conference; Area : Evaporation Heat Transfer Link: Click Here

  191. Mohammad Zoynal Abedin; Direct numerical simulation for a time-developing natural-convection boundary layer along a vertical flat plate; International Journal of Heat and Mass Transfer, Volume 52 (19-20), Year 2009, Pages 4525–4534.; May 23, 2009; Impact Factor (IF): 5.584 ; Department : ME ; Type : Journal; Area : Thermo-Fluid Mechanics

  192. Nayeem Md. Lutful Huq; Analytical solution to a mixed boundary value elastic problem of a roller-guided panel of laminated composite; Archive of Applied Mechanics; April 30, 2009; Impact Factor (IF): 1.976 ; Department : ME ; Type : Journal; Area : Applied Mechanics Link: Click Here

  193. Himangshu Bhowmik; Analysis of heat transfer and pressure drop characteristics in an offset strip fin heat exchanger; DUET; March 08, 2009; Impact Factor (IF): 3.9 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  194. Md. Khaled Khalil; Variation of Thin Film Deposition Rate on SS314 with the Variation of Gas Flow Rate Using CVD; Industrial Lubrication and Tribology (Emerald Publication),England; January 06, 2009; Department : ME ; Type : Journal; Area : Tribology

  195. A.N.M. Mominul Islam Mukut; Estimation of Wind Energy Potential in Coastal Areas of Bangladesh by Using Weibull Distribution; Proceedings of the 4th BSME-ASME International Conference on Thermal Engineering 2008; December 11, 2008; Department : ME ; Type : Conference; Area : Energy

  196. A.N.M. Mominul Islam Mukut; Prospect of Wind Energy in the Coastal Belt of Bangladesh; Pacific Journal of Science and Technology, 9(2), 442-451.; December 06, 2008; Department : ME ; Type : Journal; Area : Energy

  197. A.N.M. Mominul Islam Mukut; Analysis of Wind Characteristics in Coastal Areas of Bangladesh; Journal of Mechanical Engineering (IEB Journal), ME39(1), 45-49; May 10, 2008; Department : ME ; Type : Journal; Area : Energy

  198. Md. Anowar Hossain; A Study on Fatigue Crack Propagation Properties Using the X-Ray Diffraction Method; Materials Science Forum; April 08, 2008; Department : ME ; Type : Journal; Link: Click Here

  199. A.N.M. Mominul Islam Mukut; THE WIND ENERGY SCENARIO IN COASTAL REGION OF BANGLADESH; Proceedings of the International Conference on Mechanical Engineering 2007; December 12, 2007; Department : ME ; Type : Conference; Area : Energy

  200. Md. Anowar Hossain; Buckling of Short Columns having Non-Symmetric Responses in Tension and Compression; The Korean Society of Mechanical Engineers; November 01, 2007; Department : ME ; Type : Journal; Link: Click Here

  201. Md. Anowar Hossain; A Study on Fatigue Crack Propagation Properties Using the X-Ray Diffraction Method; Fifth International Conference on Physical and Numerical Simulations of Material Processing (ICPNS 2007); October 23, 2007; Impact Factor (IF): 4.652 ; Department : ME ; Type : Conference; Area : Applied Mechanics Link: Click Here

  202. Md. Anowar Hossain; A Study on the manufacturing conditions of metal matrix composites by low Pressure infiltration process; 10th International Conference on Advances in Materials and Processing Technologies AMPT 2007; October 07, 2007; Department : ME ; Type : Conference; Area : Applied Mechanics Link: Click Here

  203. Md. Anowar Hossain; A Study on the manufacturing conditions of metal matrix composites by low Pressure infiltration process; Journal of Mechanical Science and Technology; October 01, 2007; Department : ME ; Type : Journal; Link: Click Here

  204. Md. Anowar Hossain; Buckling of Short Columns having Non-Symmetric Responses in Tension and Compression; Proceedings of the KSME 2007; May 30, 2007; Department : ME ; Type : Conference; Area : Applied Mechanics Link: Click Here

  205. Md. Anowar Hossain; Effect of Cross-section Geometry on the Response of an SMA Column; Journal of Intelligent Material Systems and Structures; March 29, 2007; Department : ME ; Type : Journal; Link: Click Here

  206. Himangshu Bhowmik; Convection heat transfer from discrete heat sources in a liquid cooled rectangular channel; DUET; November 08, 2005; Impact Factor (IF): 4.7 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  207. Himangshu Bhowmik; An experimental study of transient heat transfer from discrete heat sources in water cooled vertical rectangular channel; DUET; September 02, 2005; Impact Factor (IF): 1.78 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  208. Himangshu Bhowmik; Analyses of convection heat transfer from discrete heat sources in a vertical rectangular channel; DUET; September 02, 2005; Impact Factor (IF): 1.78 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  209. Himangshu Bhowmik; Study of transient forced convection heat transfer from discrete heat sources in a FC –72 cooled vertical channel; DUET; May 08, 2005; Impact Factor (IF): 3.5 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  210. Himangshu Bhowmik; Experimental study of transient natural convection heat transfer from simulated electronics chips; DUET; April 08, 2005; Impact Factor (IF): 3.44 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  211. Himangshu Bhowmik; Experimental study of transient forced convection heat transfer from simulated electronic chips; DUET; March 11, 2005; Impact Factor (IF): 1.86 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  212. Himangshu Bhowmik; Effect of protrusion on thermal transient behaviour of chips in a liquid channel during loss of pumping power; DUET; January 08, 2005; Impact Factor (IF): 3.9 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  213. Mohammad Zoynal Abedin; Experimental studies on heat transfer and pressure drops through a tube with wire-coil-inserts at low turbulent Reynolds number; 4th International Mechanical Engineering Conference and 9th Annual Paper Meet, Institution of Engineers, Bangladesh, 2004, pp. 92-99; December 15, 2004; Department : ME ; Type : Conference; Area : Thermal Engineering

  214. Himangshu Bhowmik; Experimental and numerical thermal transient behaviour of chips in a liquid channel during loss of pumping power; DUET; December 08, 2004; Impact Factor (IF): 1.78 ; Department : ME ; Type : Journal; Area : Thermal Engineering

  215. Mohammad Zoynal Abedin; Heat transfer through a tube with wire-coil-inserts at low turbulent Reynolds number; 31st National Conference on Fluid Mechanics and Fluid Power, Jadavpur University, Kolkata, India, Vol. 1, 2004, pp. 731-739.; November 01, 2004; Department : ME ; Type : Conference; Area : Thermal Engineering

  216. Md. Khaled Khalil; Effect of High Pressure Injection and High Charging on Mixture Distribution Behavior in a Small DI Diesel Engine; Journal of Mechanical Engg. The Institute of Engineers, Bangladesh (IEB), Vol. ME28, pp.9-16.; January 06, 2000; Department : ME ; Type : Journal; Area : Thermal Engineering

  217. Md. Khaled Khalil; Investigation of the Influence of Different Parameters on Chatter Arising during Metal Cutting process; BUET Studies ,Vol. 02, pp34-47; January 06, 1999; Department : ME ; Type : Journal; Area : Production Engineering

  218. Md. Khaled Khalil; Investigation of Chatter Arising in Machine Tool fixture Work (MTFW) System during Turning; Proc. of the International Conference on Advanced Manufacturing Technology pp. 101-114; January 06, 1994; Department : ME ; Type : Conference; Area : Production Engineering